599 ASHLESS SYNTHETIC CHAIN FLUID

The New Innovative Advance Technology Synthetic Chain Oil For Extreme High Temperature Protection

FEATURES:

SPEC'99 -599 is specially formulated for the high temperature lubrication of conveyer chains, and provide

• For Controlled Volatility & Reduced Consumption
• Long Life Lubrication up to 250 ° C
• Extreme Pressure & Anti Wear Protection
• Anti Oxidation, minimum residue build up
• Low Evaporation Rate At High Temperature Operation
• Rust & Corrosion Protection
• Ashless base oil

PRODUCT INFORMATION

Controlled Volatility : SPEC'99 599 tailored volatility insures time for base oil to penetrate links , pins, bushings, and minimize oil consumption.

Good Wetting Properties : SPEC'99 599 wetting aids migration of product to contacting surfaces for long life lubrication

Self Cleaning Properties: SPEC'99 599 it's nature of synthetic base oil combine with nature of detergency of the oil and its affinity to metal surfaces, to keep oven chains clean and lubricated properly , when subjected to heat.

Rust Protection: SPEC'99 599 protect pin, bushings and other parts of the chain from corrosion , especially when expose to water and/or steam condensate.

Extreme Pressure Protection: SPEC'99 599 contain exceptional anti wear additive to provide extreme-pressure and anti wear protection which permit chain operation with a relatively lower power consumption. It prevent metal parts from seizing and odes not affect operational clearances.

Typical Application: Lubrication of Oven Chains, Furnace parts such as pulleys, sprockets, hinges, bearings and other parts exposed to high temperature. Operation of drying ovens, curing ovens , designed for use in Glass Fiber Insulation Manufacturing, high temperature kilns (e.g brickyards ) , basic metal mills, heat treating plants, foundries.

Application Recommendations: To obtain maximum effectiveness , SPEC'99 599 is highly recommended to apply on a new clean chains and slide rails. Because the build up carbon on the chain acts like a sponge to the synthetic chain oil and results in increased usage of oil. If the SPEC'99 599 was applied with petroleum base oil is a soft goo that will clog the pins on the pins and bush, as well as oil inlets of force feed lubricators.

TYPICAL SPECIFICATIONS