255 ULTRA OPEN GEAR LUBRICANT

SPEC'99 – 255 , A REVOLUTIONARY LUBRICANT FOR OPEN GEAR, TO SOLVE ONE OF THE TOUGHEST LUBRICATION PROBLEM FOR TODAY INDUSTRY.

 

 

FEATURES:

SPEC'99 - 255 has tremendous adhesive and cohesive characteristics, with the advance additives that give you re-lubrication with every turn of the gears.

* Great shear stability, to prevent “sling off ” from gear teeth

* Total water “wash - out ” resistance

* Climatically stable

* A natural E.P. stringiness enhanced to the metal surface withstand load

* Anti - corrosion and oxidation

* Need only a thin layer application, long lasting and economical

PRODUCT INFORMATION

SPEC'99 - 255 is an open gear lubricant specially formulated to withstand high load and shearing of open gears, fifth wheels and heavy duty equipment.

SHEAR STABILITY CHARACTERISTIC: SPEC'99 - 255 has an excellent shearing capability under the most toughest wiping and sliding actions, as it will provide a superior hydrodynamic film to prevent scuffing, pitting, galling, scoring, rippling and clawing.

TOTAL WATER RESISTANCE: SPEC'99 - 255 is totally water “ wash - out ” resistance, especially operate under the critical open condition, where there is always has rain and water pressure contact.

CLIMATICALLY STABLE: SPEC'99 - 255 doesn't thin off easily during high temperatures operation and will not become harden during the low temperature operation.

EXTREME PRESSURE CHARACTERISTIC: SPEC'99 - 255 has a natural E.P. stringiness adhere to the metal surface to resist, Shock, Meshing, Start-up, Loading, Brake seizure, Squeeze out, Pressure and Ratio alteration.

SUPERB HIGH FILM STRENGTH: The stringy lubricating substance is pulled over subsequent gears and actually re-lubricate the gears. This process will prevents metal to metal contact with each revolution of the gear.

WIDE APPLICATION: SPEC'99 - 255 has unlimited application in open gear equipment: Cranes, hoists, wind-pumps, water pumps, winches, timber drags, rail pulleys, funiculars, cable ways, ski lifts, rotary kilns, shovels and thousands of construction equipment and plant machinery.

TYPICAL SPECIFICATION:

FLASH POINT, COC, ( º F )……………………………...

255-295

DROPPING POINT, ASTM, º C ( º F)…………………....

NONE – MELT

FLASH POINT, COC, ( º F )…………………………..….

90

BASE OIL DATA:

VISCOSITY @ 210 º F, SUS…………………..................

850-950

VISCOSITY @ 100 º F, SUS…………………..................

1900-2000

TIMKEN OK LOAD…………………………………..........

40

RUST PREVENTION………………………................….

PASS

SHELL ROLL STABILITY, POINT CHANGE..................

10.0