220 MULTI-PURPOSE SHOCK RESISTANT GREASE

SPEC'99 – 220, Is an advance shock resistant grease, that provide an excellent lubricating protection under the most adverse condition .

FEATURES:

SPEC'99 - 220 , Is a premium multi-purpose bearing grease, specially formulated for Industrial & Automotive equipment to provide:

  • Excellent Adhesives and Cohesive properties
  • Fortified with “Spec-Gx” exclusive additives, minimize wear
  • Form a tough film, avoid direct shocking damage
  • Stable in oxidation for longer service life
  • Persistent performance under dirt, mud and water “wash-out” condition.
  • Rust & Corrosion protection
  • Truly multi-purpose for all type of bearings
  • E P properties that withstand high shock load

PRODUCT INFORMATION

ADHESIVENESS AND COHESIVENESS: SPEC'99 - 220 is specially fortified with a combination of polymer and “Spec – Gx” additives package, which will form a tough film strength for the lubrication of bearing, it will not break down or disintegrate.

COMPLETELY WATER RESISTANT: SPEC;99 - 220 has a good properties protect against water “wash-out” and prevent contamination by dirt, mud and wet condition, this unique properties make the grease an ideal grease in presence of hot and cold water.

HIGH SHOCK RSISTANT: SPEC'99 - 220 has an excellent Shock Load carrying properties, enable it in resisting severe conditions impact, would not pound out to prevent wear and tear with good shear stability.

WIDE TEMPERATURE RANGE: SPEC'99 - 220 has an outstanding wide temperature operating range from –40 ° C to 193 ° C and above, resist oxidation and extended service life.

RUST AND CORROSION INHIBITIORS: SPEC'99 - 220 is out standing in resisting rust and corrosive environment

LOW COEFFICIENT OF FRICTION: SPEC'99 – 220 in regardless of mechanically design, 220 fortified with “Spec-Gx” work well in protecting moving surface

TRULY MULTI-PURPOSE: SPEC'99 - 220 one grease for all type of bearings, including plain bearings, heavily loaded journal bearings, ball and roller bearings, needle bearings, couplings, wheel bearings, disc brake, fifth wheels, U-joint, steering linkage, chassis and also in electric motors bearings, excellent for most seal-for-life bearings.

TYPICAL SPECIFICATIONS:

NLGI CONSISTENCY.............................................………………. 2
   
PENETRATION, @ 77 o F ASTM Worked...............…………….. 270 - 290
   
DROPPING POINT, ASTM, o F...............................……………... 380
   
COLOR…….............................................................………………. GREEN
   
APPEARANCE…………...........……………….......……………... STRINGY
   
TIMKENT OK LOAD……………………………………………...... 55
   
BASE OIL DATA:  
VISCOSITY:  
cSt @ 40 o C.......................................................……………........... 235
cSt @ 100 o C......................................................…………….......... 17.0