200 NON - MELT MOLY GREASE

SPEC'99 – 200, EXTREMELY HIGH TEMPERATURE, MULTI – PURPOSE NON - MELT MOLY GREASE.

SURPASS SEVERE SERVICE APPLICATION

FEATURES:

SPEC'99 - 200 , is represent the “State of the Art” in grease technology, with an exceptional versatile out perform characteristics:

• Extremely resistant to softening at high temperature
• Exceptional High Load carrying properties - “MOLY”
• Excellent Water “Wash – out” resistant
• Oxidation inhibited for long service life
• Enhanced with exclusive formulation of E. P. additive - “SPEC - GX”, additional protection from wear
• Rust & Corrosion protection
• Adhesive to metal surface

PRODUCT INFORMATION

SPEC'99 - 200 is the finest multi - purpose grease blended with high VI paraffin base stocks, additional with the proven performance of powdered moly and enhanced with “ SPEC - GX ” E. P additive to make the grease far out - perform from any other high technology greases in the market. Recommended for lubrication of kiln car wheel bearings, furnace door hinges, heat exchange motor bearings, oven conveyor chains and many other high temperature application .

FRICTION & HEAT REDUCTION: The major factor for the superiority of SPEC'99 - 200 is the unique anti - friction compound “Moly” (MOLYBDENUM DISULFIDE ), it plate metal surface with a thin “slippage planes” protection film, the film only one - million of an inch thick, and is more than sufficient to provide an extremely durable second layer of lubrication.

HIGH TEMPERATURE PROTECTION: Field performance proven that SPEC'99 - 200 has an excellent lubrication at temperatures exceeding 500 o F (260 o C), with the non -melt synthetic gelling agent that make the grease won't melt even at elevated temperature, and it won't ran off when the equipment is stopped, that help to reduce grease consumption, extended greasing interval.

EXCELLENT LOW TEMPERATURE PERFORMANCE: SPEC'99 - 200 's high VI base stocks won't thicken at low temperatures, nor does the synthetic gelling agent harden.

SPEC'99 - 200 will still perform lubrication well even at temperatures below 30 o F (-34 o C).

WATER “WASH - OUT” RESISTANT: The adhesiveness to metal surface that make SPEC'99 - 200 resist water wash out, especially to the lubrication at chassis, fifth wheel and water pump.

OXIDATION INHIBITOR: The natural oxidation resistance that allow the grease to retain its protective film strength and high temperature stability, to prevent forming harmful varnish, gums and other oxidation by - products as readily.

CUT RUST & CORROSION: The anti - corrosion additive will build a protecting shield to prevent from chemical attack at high temperature or in corrosive environment .

VERSATILITY: Has a wide variety application that included roller, sleeve and pillow block bearings, ball joints and slide ways. It is a good replacement for sodium calcium and lithium based greases in unsatisfactory high temperature application. Is USDA “H2” Rating, acceptable for meat processing plant, poultry, rabbit, shell egg grading and egg products inspection program.

TYPICAL SPECIFICATION