* PREVENTS PRIMING, FOAMING AND CARRYOVER

* SIMPLE TO USE – EXCESS TREATMENT DOES NOT HARM BOILER

PRODUCT INFORMATION

Specially recommended for use in food products, or other installations. Where effective corrosion control can be assured without the slightest possibility of contamination. (Recommended for non-return system).

Recommended for high pressure boilers with low hardness (softener at low hardness in raw material supply) for control of hardness (especially compounded to control dissolved gases)

As well as residue carbonates and bicarbonates. Contains oxygen scavengers. U>S> Dept. of Agriculture (for use where steam injected directly in food products) and milk and Food Program Dept. Washington D.C. approved, and meets requirements noted by the U.S. Dept. of Health, Education and Welfare.

For best operation, boilers should be blown down and dosed daily. Boilers with high make-up water require approximately 1% of Khemix 202 to water. Consult pH paper for proper adjustment of dosage. The following table will supply general guidelines, and those will be modified by our laboratory's recommendation supplied to you at no charge. Occasional excess of product in overshooting the mark in pH adjustment will not harm the system, continued boiler operation will bring this down to within operative range

BLOWN DOWN RATES

*Values In Inches Of Sing Glass Water Level*
Boiler H.P Rating	Less than 9 gr/gal make up	9-17 gr/gal make up	More than 18 gr/gal make up
25	1'/week	2'/week	1 ½' – 2x weekly
50	1'/week	2'/week	1 ½' – 2x weekly
75	1 ½'/week	1 ½ -2' x week	2-3' Per Day
100	2'/week	2' 2 ½ x week	1' Per Day

TYPICAL WEEKLY DOSAGES :

*Make-up Feed Water Hardness*
Boiler H.P Rating Gr/Gal	Less than 150P.P.M./9 gr/gal	150-299P.P.M/9-17 Gr/Gal	More than 300/ 18
25	24oz.	1 ½ quarts	½ gallon
50	48oz.	3 quarts	1 gallon
75	72oz.	4 ½ quarts	1 ½ gallon
100	96oz.	6 quarts	2 gallons