169 TFE DRY LUBE

PRODUCT INFORMATION

KHEMIX 169 TFE Dry Film is a FLUOROTELOMER lubricant contains an extremely fine FLUOROTELOMER powder with outstanding microscopic, film-forming properties.

KHEMIX 169 TFE Dry Film has an excellent reease characteristic, is a good mold release agent lubricant with Vydax * fluoro-telomer which forms a tough, thin, chemically inert coating with high dielectric and low friction coefficients.

KHEMIX 169 TFE Dry Film is especially effective to temperatures of + 500 ° F ( 260 ° C) Use as a mold release for vacuum, hot stamp and injection molded plastic parts.

KHEMIX 169 TFE Dry Film imparts a high finish and coating allows painting of molded parts without cleaning.

KHEMIX 169 TFE Dry Film is also use in other area like coating for impression cylinders on offset and letterpress presses to prevent ink offset on high speed runs, UV and cold-set and heat-set dryers. Also use for paper machine slides and cutters.

KHEMIX 169 TFE Dry Film promotes excellent plastic flow in injection and blow molding.

KHEMIX 169 TFE Dry Film coating is not oily and withstands flushing with water solvents.