102 CONTACT & CIRCUIT BOARD CLEANER
PRODUCT INFORMATION
Khemix 102 Contact & Circuit Board Cleaner is formulated in more economical and non-ozone depleting on cleaning contact, circuit board and others. It is completely plastic safe and nonconductive to over 40 kv although it is extremely flammable.
Khemix 102 Contact & Circuit Board Cleaner is fast drying, nonconductive and certainly leaves no residue if apply on plastics, rubber and metal. This product is highly recommend to remove dirt, grease, oil, and other contaminants from contact, printed circuit boards, switches, motors, and more precision instruments.
Application:
Use only on de-energized components and equipment and always allow to dry and evacuate fumes before power is resume. As this product is extremely flammable, only use in a well ventilated area and smoking must be prohibited in the area.
Caution:
Contents under pressure, do not puncture or incinerate container. Do not expose to heat or store at temperatures exceeding 120°F.
Product Specifications:
General Appearance: |
Clear Forceful Spray |
Color: |
Colorless |
Odor: |
Aliphatic Solvent |
pH: |
N/A |
Vapor Pressure At 70°F: |
80 - 100 psig |
Spray Pattern: |
Stream |
Flammability: |
Extremely flammable per CPSC Flame Projection Test |
NFPA Code 30B: |
Level 3 |
HMIS Code |
Health-2; Flammability-3; Reactivity-0; Personal Protection-B |
|